View Your Active Data Connections - Nokia 5800 XpressMusic User Manual

Connectivity
Network type — Select the internet protocol type to
●
transfer data to and from your device. The other settings
depend on the selected network type.
Phone IP address (for IPv4 only) — Enter the IP address
●
of your device.
DNS addresses — Enter the IP addresses of the primary
●
and secondary DNS servers, if required by your service
provider. To obtain these addresses, contact your internet
service provider.
Proxy server address
●
server.
Proxy port number — Enter the port number of the proxy
●
server.
WLAN access point settings
Select Menu Settings
>
Destinations Access
>
Edit a wireless LAN (WLAN) access point — Select an access
point group and access point marked with
instructions from your WLAN service provider.
Select from the following:
WLAN network name
●
Search for networks. If you select an existing network,
the WLAN network mode and WLAN security mode are
determined by the settings of its access point device.
Network status — Define whether the network name is
●
displayed.
WLAN network mode
●
hoc network and to allow devices to send and receive data
directly; a WLAN access point device is not needed. In an
74
— Enter the address of the proxy
and Connectivity
>
point, and follow the instructions.
. Follow the
— Select Enter manually
— Select Ad-hoc to create an ad
ad hoc network, all devices must use the same WLAN
network name.
WLAN security mode
●
802.1x, orWPA/WPA2
available for ad hoc networks). If you select
network, no encryption is used. The WEP, 802.1x and WPA
functions can be used only if the network supports them.
Homepage
●
Use access point
●
using this access point automatically or after
confirmation.
The available options may vary.

View your active data connections

Select Menu
>
mgr..
In the active data connections view, you can see your data
connections:
data calls
packet data connections
or
WLAN connections
Close a connection — Select
Close all open connections — Select
Disconnect all.
View the details of a connection — Select
Details.
— Select the encryption used: WEP,
(802.1x and WPA/WPA2 are not
— Enter the web address of the starting page.
— Set the device to create a connection
Settings and Connectivity
Options
Options
© 2011 Nokia. All rights reserved.
Open
Connection
>
> Disconnect.
>
Options
>