Nokia 5800 XpressMusic User Manual page 100

Troubleshooting
Q: Why can't my Nokia device establish a GPS
connection?
A: Establishing a GPS connection may take from a couple of
seconds to several minutes. Establishing a GPS connection in
a vehicle may take longer. If you are indoors, go outdoors to
receive a better signal. If you are outdoors, move to a more
open space. Ensure that your hand does not cover the GPS
antenna of your device. If the weather conditions are bad,
the signal strength may be affected. Some vehicles have
tinted (athermic) windows, which may block the satellite
signals.
Q: Why can't I find my friend's device while using
Bluetooth connectivity?
A: Check that both devices are compatible, have activated
Bluetooth connectivity, and are not in hidden mode. Check
also that the distance between the two devices is not over 10
metres (33 feet) and that there are no walls or other
obstructions between the devices.
Q: Why can't I end a Bluetooth connection?
A: If another device is connected to your device, you can end
the connection from the other device or deactivate Bluetooth
connectivity in your device. Select
Connectivity Bluetooth
>
Q: Why can't I see a wireless LAN (WLAN) access
point even though I know I'm within its range?
A: The WLAN access point may use a hidden service set
identifier (SSID). You can only access networks that use a
hidden SSID if you know the correct SSID, and have created a
100
Menu Settings
>
Bluetooth > Off.
>
WLAN internet access point for the network on your Nokia
device.
Q: How do I turn the wireless LAN (WLAN) off on
my Nokia device?
A: The WLAN on your Nokia device turns off when you are not
connected or trying to connect to another access point, or not
scanning for available networks. To further reduce battery
consumption, you can specify that your Nokia device does not
scan, or scans less often, for available networks in the
background. The WLAN turns off in between background
scans.
To change the background scan settings, do the following:
1. Select Menu
LAN Options
>
2. To increase the background scan time interval, adjust the
time in Scan for
select Options
availability
3. To save your changes, select Back.
When Show WLAN availability
availability icon is not displayed in the home screen.
and
However, you can still manually scan for available WLAN
networks, and connect to WLAN networks as usual.
Q: What do I do if the memory is full?
A: Delete items from the memory. If
to perform operation. Delete some data first.
low. Delete some data from phone memory.
Settings and Connectivity
>
> Settings.
networks. To stop background scans,
Settings Show WLAN
> >
> Never.
is set to Never, the WLAN
Not enough memory
© 2011 Nokia. All rights reserved.
Wireless
>
or Memory
is displayed