View Your Active Data Connections; Synchronisation - Nokia N97 mini User Manual

Hide thumbs Also See for NOKIA N97 mini:
Table of Contents

Advertisement

WLAN internet access points
Select
Menu
Settings
>
Destinations
Access
>
To edit a wireless LAN (WLAN) access point, open one of the
access point groups, and select an access point marked with
.
Follow the instructions from your WLAN service provider.
Select from the following:
WLAN network name — Select
for
networks. If you select an existing network, WLAN
network mode and WLAN security mode are determined by
the settings of its access point device.
Network status — Define whether the network name is
displayed.
WLAN network mode — Select
network and to allow devices to send and receive data
directly; a WLAN access point device is not needed. In an ad
hoc network, all devices must use the same WLAN network
name.
WLAN security mode — Select the encryption used: WEP,
802.1x, or
WPA/WPA2
(802.1x and WPA/WPA2 are not
available for ad hoc networks). If you select
no encryption is used. The WEP, 802.1x and WPA functions
can be used only if the network supports them.
Homepage — Enter the web address of the starting page.
Use access point — Set the device to create a connection
using this access point automatically or after confirmation.
© 2011 Nokia. All rights reserved.
and
Connectivity
>
point, and follow the instructions.
Enter manually
Ad-hoc
to create an ad hoc
Open
The available options may vary.

View your active data connections

Select
Menu
mgr..
In the active data connections view, you can see your data
connections:
data calls
packet data connections
WLAN connections
or
Search
Close a connection
Select
Options
Close all open connections
Select
Options
View the details of a connection
Select
Options

Synchronisation

With the Sync application, you can synchronise your notes,
messages, contacts, and other information with a remote
network,
server.
Select
Menu
Sync.
You may receive synchronisation settings as a configuration
message from your service provider.
Settings
and
Connectivity
>
> Disconnect.
Disconnect
all.
>
> Details.
Settings
Connectivity
>
>
Connection
>
Data transfer
>
>
55

Advertisement

Table of Contents
loading

Table of Contents