Using The Projector; Powering The Projector On / Off; Powering On The Projector - Optoma Data Projector User Manual

Using the Projector

When Power mode

(Standby) is set to
Eco (> 0.5W) and
the projector is in
standby mode,
VGA output, Audio
pass-through
and RJ45 are
deactivated.
 If the projector does
not automatically
search for source,
press on the
control panel or the
Menu button on the
remote control. Go
to "OPTIONS" and
set "Source Lock"
to "Off". See page
42.
18
English

Powering the projector On / Off

Powering On the Projector

1. Connect the power cord to the projector and to the power
source. When connected, the POWER/STANDBY LED
lights Amber.
2. Press on the control panel or on the remote control. The
POWER/STANDBY LED lights Blue.
The startup screen displays in approximately 3 seconds.
The first time you use the projector, you may be asked to
select the preferred language and power saving mode.
3. Turn on and connect the source signal that you want to
display on the screen (computer, notebook, video player,
etc). The projector detects the source automatically.
4. If you connect multiple sources at the same time, press
on the control panel or the direct source key on the
remote control to switch between inputs.
POWER/STANDBY