Admin; Alert Setting; Admin Alert Setting - Optoma Data Projector User Manual

Network Display

ADMIN |

Alert Setting

Obtain the SMTP

information from
your network
administrator.
Click the Email

Alert Test button
to test the email
alert settings.
82
English
Use the Alert Setting screen to configure the projector to send
out email alerts when errors occur, such as fan failure, high
temperature, or light source failure.
1. Select Enable to enable the email alert feature.
2. In the Email Alert section, enter the following information:
To: Email address where you want to send the email
►
alert.
Cc: Second email address where you want to send the
►
email alert.
From: Email address from where the email alert is sent.
►
Subject: Subject title of the email alerts.
►
3. In the SMTP Setting section, enter the following
information:
Outgoing SMTP Server: The SMTP server of the email
►
address from where email alerts are sent.
Username: User name of the SMTP server.
►
Password: Password of the SMTP server.
►
4. In the Alert Condition section, check the type of email
notification that you want to receive. You may select more
than one condition.
5. When done, click Save to save and apply the settings.