Optoma Data Projector User Manual page 13

Mode or Laser
5
(Button varies on
model)
6 Keystone +/-
7 Brightness
8 Freeze
9 HDMI
10 S-Video
11 Contrast
12 Number Keys
13 VGA
14 USB
15 3D
16 Video
17 AV mute
18 Menu
19 Zoom
20 Volume +/-
21 Page -
22 Page +
Four Directional
23
Keys
24 R Button
25 Re-Sync
26 Switch
Introduction
With Laser version: Press to use the laser pointer.
Without Laser version: Press Mode to change
modes.
Adjust image distortion caused by tilting the
projector.
Adjust the brightness of the image.
Pause the screen image.
Press this button again to unlock.
Choose HDMI as the source.
Choose S-Video as the source.
Adjust image contrast.
Press the keys to enter numbers.
Choose VGA as the source.
Choose USB flash drive as the source.
Turn the 3D OSD menu on/off.
Choose Composite video as the source.
Momentarily turns off/on the audio and video.
Launch the on-screen display (OSD) menu. To exit
OSD, press "Menu" again.
To magnify or reduce the size of the projected
screen.
Adjust to increase / decrease the volume.
Use this button to page down.
Use this button to page up.
Use to select items, make adjustments
to your selection, or mouse emulation via USB.
Mouse right click.
Automatically synchronizes the projector to the
input source.
Switch the function of the four directional keys.
13
English