Open Optoma Web Utility - Optoma Data Projector User Manual

Open Optoma Web Utility

1. Connect your computer to the same network where the
projector is connected.
2. Launch your web browser application (e.g. Internet
Explorer, Safari, Firefox, etc).
3. On the address bar, type the IP address noted from the
Network Display screen.
4. The Optoma Web Utility screen opens.
To use Optoma Presentation Software, click the
►
operating system of your computer to download the
software (see "Downloading the Software" on page
68).
To use Crestron RoomView, click Crestron on the left
►
panel menu (see "Crestron RoomView" on page 74 ).
To project images from up to four computer
►
simultaneously, click Conference Control on the left
panel menu (see "Web Utility: Conference Control" on
page 76).
To change the projector settings by web utility, click
►
Admin on the left panel menu. See "Web Utility: Admin
Settings" on page 78 for more instructions.
Network Display
67
English