About The Tp Receivers; Features; Tp R Bnc A Receiver; Specifications - Extron electronics TP R AV User Manual

Introduction
Introduction, cont'd

About the TP Receivers

The Extron Twisted Pair (TP) receivers receive transmissions of
RGB video, component video, S-video, composite video, and
stereo audio over Extron's Skew-Free™ A/V UTP cable or
standard Category (CAT) 5 unshielded twisted pair (UTP),
shielded twisted pair (STP), or foil shielded twisted pair (FTP)
cable. The TP R BNC A, TP R BNC AV, and TP R AV receivers
are designed for longer transmission distances (200 to 1000 feet)
and the TP R 15HD A is designed for shorter transmission
distances (100 to 800 feet).
The minimum reliable transmission distance for the TP R BNC A,
TP R BNC AV, and TP R AV is 50 feet. The TP R 15HD A
provides reliable reception and high quality video output
without the minimum distance limitation.
The maximum distance is determined by the output frequency
and resolution. The following table specifies the recommended
maximum transmission distances using Extron skew-free A/V
UTP cable or UTP CAT 5 cable, terminated with CAT 6, or at
least CAT 5e, rated connectors.
Extron recommends using the highest quality cable
available and affordable. We also recommend the use of
pre-terminated and tested cables. Cables terminated on
site should be tested before use to ensure that they
comply with Category 5e specifications.
Recommended transmission ranges at 60 Hz,
TP R 15HD A
Video format
Composite video and audio
Component video and S-video
640 x 480
800 x 600
1024 x 768
1280 x 1024
1600 x 1280
Recommended transmission ranges at 60 Hz,
all others
Video format
Composite video and audio
Component video and S-video
640 x 480
800 x 600
1024 x 768
1280 x 1024
1600 x 1280
1-2 TP Receivers • Introduction
Maximum range
800 feet
800 feet
500 feet
400 feet
300 feet
200 feet
100 feet
Maximum range
1000 feet
1000 feet
1000 feet
800 feet
600 feet
400 feet
200 feet
It is possible to exceed the recommended distances,
however, image quality may be reduced.
The TP receivers can only receive and output signals
transmitted by Extron TP transmitters. This user's manual
documents the installation, features, and operation of the TP
receivers only. For information about the TP transmitters, refer
to the TP Transmitters Family User's Manual, which accompanies
the transmitters.

Features

All Extron TP receivers provide the following features:
Audio output — Provides unbalanced (left/right) audio on
RCA connectors, and balanced or unbalanced audio on
3.5 mm, 5-pole captive screw connectors.
Level control — Allows you to manually control the image
brightness.
Peaking control — Allows you to manually control the image
sharpness.

TP R BNC A receiver

The TP R BNC A receiver has the following features:
Video output — Provides RGBHV, RGBS, or RGsB video on 5
BNC connectors.
RJ-45 connector — Allows attachment to an Extron TP
transmitter.
Cable length compensation — Allows you to select whether to
compensate for long cable runs automatically or
manually.
Mounting —
Mounts in a rack with Extron's 1U rack shelf
(part #60-190-01) or 1U Basic Rack Shelf (part #60-604-01).
Mounts to a projector mounting bracket with Extron's
Projector Mounting Kit (part #70-077-04).
Mounts under or through furniture with Extron's Under
Desk Mounting Kit (part #70-077-01) or Through Desk
Mounting Kit (part #70-077-02).
TP Receivers • Introduction 1-3