Advertisement
Quick Links
Cable Cubby 500 and 700 • Installation Guide
This guide provides instructions for an experienced installer to install and connect the Extron
Cable Cubby 500 and 700 Cable Access Enclosures.
The Cable Cubby units are furniture-mounted enclosures for cable access,
connections, and AC power. Cables that are not in use can be stored out of the
way while remaining connected to the presentation system.
Planning
Check with local and state regulations before starting
the installation:
…
Ensure that the planned installation complies with building and electrical codes.
…
Ensure that the planned installation complies with the Americans with Disabilities Act or
other accessibility requirements.
Check all parts and equipment before installation:
…
Ensure that all parts are present in each kit.
…
Ensure that necessary tools and equipment are available for the installation.
Kit Contents
Cable Cubby 500
500
Cable Cubby 700
Zip Ties
Hole Plugs
Connectivity Bracket
i i
B
k
Cable Cubby 500
#6 Mounting Screws
Tweeker
and Star Washers
Zip Ties
ws
0
Cable Cubby 700
s
00
Cable Cubby 700
#4-40 Module Screws
ews
Hole Plugs
Retractor Trim
and Screws
Connectivity Bracket
i i
B
k
#6 Mounting Screws
Connectivity Bracket
i i
B
k
and Star Washers
#4-40 Module Screws
Tweeker
Tweeker
s
ws
ws
Retractor Trim
Retractor Trim
and Screws
and Screws
Cable Cubby 500
Zip Ties
Cable Cubby 700
Connectivity Bracket
Cable Cubby 500 and Cable Cubby 500 CCB
Hole Plugs
Tweeker
#6 Mounting Screws
and Star Washers
Cable Grommet Plate
Connectivity Bracket
i i
B
k
Cable Grommet Plate
#4-40 Module Screws
Cable Cubby 700
Tweeker
AAP Frame Plate
Retractor Trim
and Screws
AAP Frame Plate
Cable Cubby 500
Cable Grommet Plate
Connectivity Bracket
i i
B
k
"Show Me" Cable Trim Plate
Retractor Pin & Clip
Retractor Trim
and Screws
Zip Ties
Retractor Pin & Clip
Tweeker
AAP Frame Plate
Cable Grommet Plate
Cable Grommet Plate
Connectivity Bracket
Cable Cubby 500
Hole Plugs
AAP Frame Plate
AAP Frame Plate
Tweeker
Zip Ties
Retractor Pin & Clip
Retractor Trim
#6 Mounting Screws
and Screws
and Star Washers
Connectivity Bracket
#4-40 Module Screws
Hole Plugs
Retractor Pin & Clip
Retractor Pin & Clip
Retractor Trim
Tweeker
and Screws
#6 Mounting Screws
and Star Washers
#4-40 Module Screws
Cable Cubby 700
Cable Grommet Plate
i i
B
k
1
AAP Frame Plate
4
1
Retractor Pin & Clip
AC Power Module
1
Cable Cubby 700
1
Cable Grommet Plate
i i
B
k
(3) 3/8", (1) 1/4"
Cable Cubby 700
AC Power Module
AC Power Module
1 trim, 2 screws
AAP Frame Plate
Cable Grommet Plate
i i
B
k
1
Retractor Pin & Clip
AAP Frame Plate
4
Cable Cubby 700
2
AC Power Module
8
AC Power Module
2
2
2
AC Power Module
(6) 3/8", (2) 1/4"
2 trims, 4 screws
AC Power Module
2
AC Power Module
8
1
Advertisement
Related Manuals for Extron electronics Cable Cubby 500
Summary of Contents for Extron electronics Cable Cubby 500
- Page 1 Cable Cubby 500 and 700 • Installation Guide This guide provides instructions for an experienced installer to install and connect the Extron Cable Cubby 500 and 700 Cable Access Enclosures. The Cable Cubby units are furniture-mounted enclosures for cable access, connections, and AC power.
-
Page 2: Preparing The Table
Cable Cubby 500 and 700 • Installation Guide (Continued) Preparing the Table Cut a hole in the surface where the enclosure will be installed. Read the following information before making a cut. Determine the best location for the enclosure. …... -
Page 3: Step 2 - Install The Modules
Preparing the Cable Cubby Step 1 — Assemble the connectivity modules of your choice. Connectivity modules allow you to populate the Cable Cubby with a combination of AAPs, cable pass-through modules, or Retractors. AAP Module Secure the AAP plate on the NOTE: After assembling the connectivity brackets, using... - Page 4 Connecting a Cable Cubby 500 CCB For Cable Cubby 500 CCB models, follow the instructions below, then proceed to “Mounting the Cable Cubby in the Table.” The Cable Cubby 500 CCB contains three contact closure buttons to control input selection on Extron switchers and products with contact closure control ports.
- Page 5 Cable Cubby 500 and 700 • Installation Guide (Continued) Step 2 — Under the table, adjust the side clamps on the enclosure. NOTE: To lower the side clamp, turn the lever down, then press and hold the locking plate while sliding down the clamp.
-
Page 6: Installation Checklist
(Inside India Only) Extron USA - West Extron USA - East +1.714.491.1500 +1.919.850.1000 +31.33.453.4040 +91.80.3055.3777 +1.714.491.1517 FAX +1.919.850.1001 FAX +31.33.453.4050 FAX +91.80.3055.3737 FAX www.extron.com © 2017 Extron Electronics All rights reserved. All trademarks mentioned are the property of their respective owners.
Need help?
Do you have a question about the Cable Cubby 500 and is the answer not in the manual?
Questions and answers