KitchenAid KXD4630YSS0 Use & Care Manual page 8

INSTALLATION INSTRUCTIONS
INTERIOR-MOUNTED VENT MOTOR
Determine which venting method is best for your application.
Vent system can terminate either through the wall or floor.
Island Location
Front (standard) mounted Rear mounted blower motor
blower motor
m
&
m
. _ .................................................... i_,_.'A
A. Down vent
NOTE: For island locations, a front or rear mounted blower motor
can also be mounted for right or left venting if needed for your
application. Most island applications would still require the
venting to be directed down through the floor.
Built-In Cabinet Locations
/
B
A. Down vent
B. Left vent
C. Right vent
if' ...........
II II .......
C
Island Location--Vent System Installed Under a Concrete
Slab Using PVC Sewer Pipe
Front (Standard) Mounted Blower Motor
A
K
B
,i ................................................. E
S
J '_/
Rear Mounted Blower Motor
A
M
B
S_
K J
_ ....................... F E
I
A. Wall cap
B. 6" (15.2 cm) round metal vent
C. 16" (40.6 cm) maximum
D. 6" (15.2 cm) round PVC sewer pipe
E. 6" (15.2 cm) round metal vent transition with
damper (supplied)
F. 6" (15.2 cm) round PVC coupling
G. Concrete slab
H. 6" (15.2 cm) round PVC sewer pipe
I. 6" (15.2 cm) round 90 ° PVC sewer pipe elbow
J. Tightly pack gravel or sand completely around pipe.
K. 6" (15.2 cm) round 90 ° PVC sewer pipe elbow
L. 6" (15.2 cm) round PVC coupling
M. 12" (30.5 cm) minimum
8