Dryer Use - Kenmore HE4 110.9508 Series Use & Care Manual

8. Read "Dryer Use."
9. Wipe the dryer drum interior thoroughly with a damp cloth to
remove any dust.
f0. Set the dryer on a full heat cycle (not an air cycle) for
20 minutes and start the dryer.
If the dryer will not start, check the following:
• Dryer is plugged into a grounded 3 prong outlet.
• Electrical supply is connected.
• House fuse is intact and tight, or circuit breaker has not
tripped.
• Dryer door is closed.
1f. When the dryer has been running for 5 minutes, open the
dryer door and feel for heat. If you do not feel heat, turn the
dryer off and check to see that the gas supply line shutoff
valve is open.
• If the gas supply line shutoff valve is closed, open it, then
repeat the 5-minute test as outlined above.
• If the gas supply line shutoff valve is open, contact a
qualified technician.
DRYER USE
AUTO DRY CASUAL
S_ATt_Sw_0 CYCLES 7_
DAMPO 0 MORE NORMAL
C001 Down40 0 I_
O LESS
CLOTH_S DRy 0
WRIr#&E GtJARD 0 @ JEANS
AUTO DRY
CECK _N_ 5CI_E _ t40 L_L
_ss_ _mD_ BULKY / BEDDIN
C0_T_O [0C_E'_ 0 S_C0_DS T 010C_/
JNIOC_ COnTROl
DELICATE MANUAL S]IM_JED
CYCLES IIM£R MAINING
IMED DRY _ _
StArT EXPRESSDRY MORE TIME
(_ LESS TIME
/_" TOUCH UP
HEAVY DUTY
OPTIONS MODIFIERS
Q HIGH
Q M£DIUM HIGH
• MEDIUM
• LOW • HIGH
DAMP DRY SIGNAL
(_T:Ie¥_LESON_ • EXfRALOW 0 LOW
• AIR DRY • OFF
WRINKLE GUARD TEMPERATURE END of CYCLE SIGNAL
(MA_qUAr rycl _ 0NY
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
flammable on it (even after washing).
Failure to follow these instructions can result in death,
explosion, or fire.
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Items containing foam, rubber, or plastic must be dried
on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in death
or fire.
Follow these basic steps to start your dryer. Please refer to
specific sections of this manual for more detailed information.
f. Clean lint screen before or after each cycle. See "Cleaning
the Lint Screen."
2. Place laundry in dryer and shut door. See "Loading."
3. Press the selected cycle pad. The preset settings for Auto Dry
Cycles or Manual Cycles will glow. The estimated or actual
cycle time (in minutes) will show in the display.
To
To
use an Auto Dry Cycle
Select an Auto Dry Cycle.
Select AUTO DRY LEVEL to adjust how dry you want the
load. As the cycle runs, the control senses the dryness of
the load and adjusts the time automatically for the
selected dryness level.
Select the desired Options.
make changes during an Auto Dry Cycle:
• Press PAUSE/CANCEL
14