Control Panel - Jenn-Air JJW9530DDR Use & Care Manual

O00K[NG
Control Panel
f
A B
UPPEROVEN
CANCEL Convect Bake
I t
Oven More
Light Options Clean Broil
Oven
CANCEL Convect Bake
,Z [ [
Options Clean Broil
C
LOWER OVEN
_JENN-AJR
GHr
Bad( O Enter
spice
The control pane] is designed for ease in programming. The display window shows options for each function and moves from step
to step through the programming process, in douMe ovens, Upper Oven or Lower Oven is displayed to indicate which oven is being
programmed. Control pand features vary by model Oven display above is a doubb oven programmed for bake and broil operations.
i
iA
ill
[ iiii_
i
[B
C
i
i iii
i
iD
i
iF
iG
jH ¸
I
i
Function pads
Lower oven
Function pads
Upper oven
Quickset Pads
Dbp[ay
window
Favorites
Hdp
Setup
Number pads
Use to program the lower oven for
double wail ovens.
Use to program the upper oven for
single and double wall ovens.
Use to select options in display
window (next to display window on
both sides}.
Displays oven functions, options and
time of day.
Use to access, program or save
baking cycles.
Press for on-screen help.
Use to view or change factory default
settings.
Use to enter time and temperature,
or to enter Favorites names.
Quickset Pads
Quickset pads are located on each side of the display window
and are used to select the desired function or option in the
display window. To select the option or function, press the
Quickset pad next to the word.
If you need to back out of a function or option in the display,
press the Back pad. When your programming is complete,
press the Enter pad or wait four seconds and the function wiii
start automatically.
4
Up or Down arrows indicate additional screens with additional
options. Press the Quickset pads next to the arrows to scroll
through the display.
Note: Four seconds after entering the function, option,
number or letter, the function will automatically be en-
tered. If more than 30 seconds elapse between steps in
programming, the function will be canceled and the
display will return to the previous display.
CJock
Setting the Clock: .......
1. Press the Setup pad.
Setup
\ .....
2. Select Clock using the Quickset pads.
3. Select Time.
4. Enter the time using the number pads.
5. Press Enter.
6. Select AM or PM in 12 hour mode. (For 24 hour clock, see
page 50
7, Select Set.
8. To exit the Setup mode, press Setup.