Jenn-Air JJW9530DDR Use & Care Manual page 23

Tones (beeps)
The number of beeps heard at the end ofcooking and at the
end of timer operation and their voiume can be adjusted.
TO adjust the beeps: ............
1. Press Setup pad.
2. Use the down arrow to ..........
scroii down.
3. Seiect Tones.
TO change the beeps at the end of cooking:
1. Seiect Cook+
2. Seiect 1-30 to hear one beep every thirty seconds.
OR
Seiect 1-60 to hear one beep ever}, sixty seconds.
OR, use the down arrow to scroii down.
Seiect 1 Beep to hear one beep oniy at the end of cooking.
3. Seiect Set.
4. Press the Setup pad to exit+
To change the timer beeps:
1. Seiect Timers+
2. Seiect 2-30 to hear two beeps ever}, thirty seconds+
OR
Seiect 2-60 to hear two beeps ever}, sixty seconds+
OR, use the down arrow to scroii down.
Seiect 1 Beep to hear one beep oniy at the end of the set
time.
3. Select Set.
4. Press the Setup pad to exit.
To change the vomume of the beeps:
1. Press the down arrow to scroii to the next screen.
2. Seiect Voiume.
3. Seiect High-3 for the highest voiume.
OR
Seiect Med-2 for medium voiume.
OR
Seiect Low-1 for the iowest voiume.
4. Seiect Set.
5. Press the Setup pad to exit.
12 Hr Shutoff
The oven wiii automaticaiiy turn off at the end of 12 hours if
you accidentaiiy Heave it on.
To turn off this feature:
1. Press Setup pad.
Setup
2. Use the down arrow
to scroii through the screens to 12 Hour Shutoff.
3,
4.
Seiect On or Off using the Quickset pads.
Seiect Set.
5. Press the Setup pad to exit.
Timer Format
The dispiay format for the timer can be set from HRS/MN
(hours and minutes} to MIN/SEC (minutes/seconds}.
To change the timer fermat display:
],
2.
3.
4.
5.
6.
Press Setup pad.
Use the down arrow to scroll down.
Select Timer Format.
is ¸ -.
, Setup )
Select HRS/MIN or [vllN/SEC using the Quickset pads.
Select Set.
Press the Setup pad to exit.
Energy Saver
To save energy, the dispiay can be set to go dark if it is not
being used.
To set the Fnergy Saver feature:
1. Press Setup. ..................
Setup
2. Use the down arrow to scroll down. :
3. Select Energy Saver.
4. Select Off or On using the Quickset pads.
5. Select Set.
6. Press the Setup pad to exit.
[}emo
When Demo is selected, you wiii see a short presentation
highlighting the features of your new Jenn-Air wall oven.
1. Press Setup pad.
2. Use the down arrow to scroll down.
3. Select Demo.
4. Press the Setup pad to exit.
22