Control Panel - Jenn-Air GAS WALL OVEN Use & Care Manual

O C
VEN OOKING

Control Panel

A
G
The control panel is designed for ease in programming. The display window on the control shows time of day, timer and oven
functions. Control panel shown includes model specific features. (Styling may vary depending on model.)
A Keep Warm Use to keep cooked food warm in
oven.
B Clean Use to set self-clean cycle.
C Bake Use for baking and roasting.
D Broil Use for broiling and top browning.
E Delay Programs the oven to start cooking or
cleaning at a later time.
F Number Pads Use with other function pads to set
times and temperatures.
G Oven Light Use to turn the oven light on or off.
H Timer Sets Timer.
I Clock Use to set time of day Clock.
J Cook & Hold Bakes for a preset time, then holds food
warm for 1 hour.
K Favorite Use to set and save a specific Cook
& Hold procedure.
L Autoset Use to quickly set temperatures.
M CANCEL Cancels all operations except Timer
and Clock.
8112P336-60 5
B C D
H I
Using the Touchpads
•
•
• Press the Autoset 0 pad to enter temperature.
•
•
Clock
The clock can be set to display time in a 12-hour or 24-hour
format. The clock is set at the factory for the 12-hour format.
To change the clock to 24-hour format:
1. Press and hold the CANCEL and Favorite
2. Press the Autoset 0 pad to select 24 Hr;
3. Set the time of day following the directions in
4
E F
J K L
Press the desired pad.
Press the number pads to enter time or temperature.
A beep will sound when any pad is touched.
A double beep will sound if a programming error occurs.
Note: Four seconds after entering the number, the time or
temperature will automatically be entered. If more than 30
seconds elapse between touching a function pad and the
number pads, the function will be canceled and the display
will return to the previous display.
pads for three seconds.
• 12 Hr flashes in the display.
press again to select 12 Hr.
the To Set the Clock section.
8/10/06, 2:21 PM
M