Engine Maintenance - Exmark Quest Lawn Mower Operator's Manual

Figure 22
Located on the back of the seat.
1. Read the instructions
before servicing or
performing maintenance
2. Grease idler pivots.
3. Time interval.
4. Connect a grease gun to each fitting (Figure 21
and Figure 22). Pump grease into the fittings until
grease begins to ooze out of the bearings.
5. Wipe up any excess grease.

Engine Maintenance

Servicing the Air Cleaner
Service Interval: Before each use or daily
Every 100 hours—Replace
the paper element. (More
often under extremely
dusty, dirty conditions.)
This engine is equipped with a replaceable, high
density paper air cleaner element. Check the air
4. Check oil level.
5. Check hydraulic oil level
and refer to Operator's
manual for further
instructions.
6. Check tire pressure.
cleaner daily or before starting the engine. Check for
a buildup of dirt and debris around the air cleaner
system. Keep this area clean. Also check for loose or
damaged components. Replace all bent or damaged
air cleaner components.
Note: Operating the engine with loose or damaged
air cleaner components could allow unfiltered air into
the engine causing premature wear and failure.
Note: Service the air cleaner more often under
extremely dusty, dirty conditions.
Briggs & Stratton engine
1. Air cleaner
2. Knobs
Kohler Command engine
1. Air cleaner cover
2. Knob
31
Maintenance
Figure 23
3. Air cleaner cover
Figure 24
3. Air cleaner