Jenn-Air 720-0720 Use & Care Manual page 16

2=
3=
Using a Phillips screwdriver remove the 4 screws at the back
of grill from inside the grill 2 screws on each side of the
rotisserie infrared burner).
Remove the access cover at the back of the grill hood by
removing the 4 screws (2 screws on each side of the
rotisserie infrared burner).
5. Use 24 mm wrench to remove the orifice nut.
......... ..
A. Orifice nut
6=
Take out the orifice support, and then use a 6 mm socket and
wrench or 6 mm nut driver to remove the LP orifice at the end
of the supply pipe. Replace with Natural gas orifice.
A
4=
A. Access cover
Using a Phillips screwdriver, remove the 2 screws holding the
spider guard to the burner.
/
/
A. 2 screws
A. Orifice support
B. Orifice
7. Reinstall the spider guard, access cover, and wind baffle.
Change the Sear Burner Orifices
1. Remove the screw securing the igniter and the 2 searing side
burner screws.
/
/
/,
/
16