Installation Instructions; Freestanding Outdoor Grill Installation - Jenn-Air 720-0720 Use & Care Manual

INSTALLATION INSTRUCTIONS
Attach Right Side Shelf with Sear Burner
Excessive Weight Hazard
Use two or more people to move and install grill.
Failure to do so can result in back or other injury.
Unpack Grill
1. Remove all packaging materials and remove grill from the
shipping base.
2. Move grill close to desired outdoor location.
3. Open the grill hood.
Remove Packaging Material Inside the Grill
1. Use a utility knife to cut yellow straps and packing tape to
open box from top and remove the boxes.
2. Remove the warming shelf and grill grates from inside the grill
and remove the package inside the firebox.
3. Remove foam block and wrap from inside the grill.
1=
2.
3.
Unpack right side shelf with sear burner.
Remove 3 screws from the side of the searing side burner.
Loosen the 2 screws on the grill side panel and align the
bottom keyhole slots on the side shelf with the loosened
screws. Hook the side shelf onto the two loosened screws
and let the side shelf slide down so the screws are in the
narrow neck of the slots.
/
4=
5=
IMPORTANT: This step is meant to help with the installation,
but do not depend solely on the two screws to hold the
weight of the sear burner.
Attach the top of the side shelf to the grill (A) by inserting the
3 screws removed in Step 2 into the side shelf from inside the
grill hood and tighten.
Attach the bottom of the side shelf to the side panel (B) of the
grill by tightening the 2 screws inserted in the keyhole slots in
Step 3.
4. Replace the grill grates.
5. Place warming shelf on brackets as shown.
B
A
..... y'
A. Warming shelf brackets
B. Warming shelf