Table of Contents
Advertisement
ON-OFF switch
Plug cord into electrical
outlet.
To turn cleaner ON, push switch up.
To turn cleaner OFF, push switch down.
Transporting
cleaner
Io move your
cleaner from room
to room, put handle
in upright
position,
tilt cleaner back
on rear wheels and
push forward.
Claerryi ng
aner
The cleaner can
also be moved by
using the carrying
handle.
Handle positions
l'he handle of your cleaner has three
positions;
upright
for storage and when
using cleaning tools; operating
position
for
general operation
on carpet and floors; low
for reaching under low furniture.
Step on
handle release lever to lower handle.
Embedded DirtFINDER
TM
featu
re (available on some models}
With red and green
lights {A), the
DirtFINDER'" sys-
tem alerts the user
to areas of carpet
that may need more
cleaning atten-
tion. It is able to
sense when larger
amounts of dh't
particles,especially
embeddecl dirt, are removed.
3-0 let you know that the DirtFINDER'"
feature is ready, the red light will come on
when the cleaner is first turned on. After a
Few seconds, the red light will go off and
the green light will come on. Cleaning may
then begin.
• The red light may seldom come on dur-
ing cleaning, this means that your cleaner
is picking up primarily fine surface dust
and lint which the system may not detect,
or that the carpet is generally clean. To
increase the feature's sensitivity to dirt, set
the switch {B)to the "H}" position,
• At other times, the red light may stay on
for a considerable amount of time. This
means that the carpet contains a high level
of dirt which is being removed by the
cleaner. To decrease the feature's sensitivity
to dirt, set the switch to the "REG,"
{Regular] position.
The green light will remain on throughout
cleaning, except when the deVect.or senses
that a larger amount of dirt is being picked
up; then the red light will come on.
When the red light is on, you should take
additional
cleaning strokes in the area until
it changes tO green.
Advertisement
Table of Contents
