Table of Contents
Advertisement
1
Not all models are equipped with a time of day clock or
minute timer.
If your model is not equipped with a clock display, the
time of day and the minute timer features shown on this
page will not be available.
To set time
of day (some models)
When the range isfirst plugged in, or when the power supply
to the range has been interrupted, "12:00" will flash in the
display window indicating that thetime of day needs to beset.
1.
Press clock key pad.
2.
Press in and hold A
or V
key pad until the correct
time appears in the display. The A
key pad will
increase time and V
key pad will decrease time.
To
1.
.
set minute
timer
(some models)
Press timer
on-off key pad. "0:00" will appear in the
display window. The minute timer may be set for any
amount of time from 1 minute to 12 hours.
Press in and hold A
key pad until the desired time for
the minute timer appears in the display.
The
A
key padincreasestimeand
V
keypad
decreases time. The minute timer will automatically
start when one of these key pads are released.
Once set, the display will flash ":" indicating the minute
timer is active.
.
When the minute timer reaches the end of the set time,
the control will display "0:00" and beep three times.
The minute timer will continue to beep until either the
clock or timer
on-off
key pad is pressed at which
time the display will return to the time of day.
To cancel the minute
timer before the minute
timer
is
finished
Press timer On=Off once.
• The minute timer will not start or stop the cooking
process. It serves as an extra timer in the kitchen that
will beep when the set time has run out. The minute
timer can be used alone or while using the oven or
cooktop features.
• Press timer on=off at any time to cancel the minute
timer and return to the time of day display.
Hide quick links:
Advertisement
Table of Contents
