Table of Contents
Advertisement
NOTES
Not all models are equipped with a time of day clock or
minute timer.
If your model is not equipped with a clock display, the
time of day and the minute timer features shown on this
page will not be available.
To set time of day (some models)
When the range is first plugged in, or when the power supply
to the range has been interrupted, "12:00" will flash in the
display window indicating that the time of day needs to be set.
1. Press clock key pad.
2. Press in and hold
time appears in the display. The
increase time and
or
key pad until the correct
key pad will
key pad will decrease time.
SETTING CLOCK & MINUTE TIMER
To set minute timer (some models)
1. Press timer on-off key pad. "0:00" will appear in the
display window. The minute timer may be set for any
amount of time from 1 minute to 12 hours.
2. Press in and hold
the minute timer appears in the display.
The
key pad increases time and
decreases time. The minute timer will automatically
start when one of these key pads are released.
Once set, the display will flash ":" indicating the
minute timer is active.
3. When the minute timer reaches the end of the set
time, the control will display "0:00" and beep three
times. The minute timer will continue to beep until
either the clock or timer on-off key pad is pressed
at which time the display will return to the time of day.
To cancel the minute timer before the minute timer
is finished
Press timer on-off once.
NOTES
• The minute timer will not start or stop the cooking
process. It serves as an extra timer in the kitchen that
will beep when the set time has run out. The minute
timer can be used alone or while using the oven or
cooktop features.
• Press timer on-off at any time to cancel the minute
timer and return to the time of day display.
key pad until the desired time for
key pad
9
Advertisement
Table of Contents
