Advertisement
Available languages
Available languages
Please pay special attention to these boxes, and follow any instructions given.
WARNING statements alert you to such dangers as fire, electric shock, burns and
personal injury. CAUTION statements alert you to such dangerous personal injury
and/or property damage.
Position the handle as shown in the illustra-
tion below.
Before assembling vacuum, check the
PACKING LIST on the cover of the separate
Repair Parts List. Use this list to verify that
you have received all the components of
our new Kenmore vacuum.
Electrical Shock Hazard
Do not plug into the electrical sup-
ply until the assembly is complete.
Failure to do so could result in elec-
trical shock or injury.
HANDLE ASSEMBLY
Remove the screw located just below the
top edge of the back of the vacuum.
While holding the power cord out of the way,
slide the handle into the opening at the top
of the vacuum.
Insert the screw so it passes through the
handle into the vacuum.
Begin to tighten the screw with your fingers.
It may be necessary to adjust the handle
slightly.
Advertisement
