Kenmore 116.349254 Owner's Manual page 9

TELESCOPIC WAND WITH
SUCTION CONTROL SLIDE
Hose _mL'_]l I_-_\ltll_& I I I, Remove the
Clip
__)_ hose from the
hose clip by
pulling straight out
2, Remove the telescopic wand from its
storage position
3. Remove
the crevice
toot from its
storage posi-
tion in the
wand.. Turn
the locking
ring to the
UNLOCK
position.
1111 tt1\ c ,-ovioo
Telescopic
Wand
4. Extend the wand to its fufl length Turn
the locking ring to the LOCK position.
Attach the extension wand onto the open
end of the hose
Suction
Wand _ Control Slide
Upper
Wand
Align the tabs on the extension wand with
the "J" slots in the hose (as illustrated above
right), Push the wand into the hose and
twist to the right to lock
To achieve maximum reach
with the attachments, add the
crevice tool to the end of the
wand by inserting and
twisting slightly. :
:1 "
Telescopic
Wand,
Con trol
Crevice Raised
Tool
The dusting brush or the combination
brush may be attached directly to the
wand or placed on the end of the crevice
toot.
Crevice Tool
Dusting Brush Wand
(Some Models) ,, .._.,
Brush (Some
Models) '
TO OPERATE SUCTION
CONTROL SLIDE
Telescopic Wand
When using attachments for cleaning
draperies, small rugs with low pile and other
delicate items, twist the suction control slide
to the open position. This slide is located on
the telescopic wand, close to the hose
This will reduce suction for ease of cleaning
Note: Return
suction control
slide to the closed
position for
normal cleaning.
Suction
Control
Slide
9
CAUTION
When using attachments, be careful
not to overextend the stretch hose
when reaching, Trying to reach
!:beyond the hose stretch capability
could cause the vacuum cleaner to
tip over,