Sealed Surface Burners; General Cleaning; Oven Door - Kenmore 66572179301 Use & Care Manual

Table of Contents

Advertisement

Available languages

Available languages

4. Press STOP/CLEAR or open the door to remove "End" from
the display.
5. Close door.
The time of day will appear on the display.
To Manually
Set Soil Level:
Press twice for light soils, and "SoilL" will appear on the
display.
Press three times for average soils, and "SoilA" will appear on
the display.
Press four times for heavy soils, and "SoilH" will appear on
the display.
The oven light will not work during the Self-Cleaning cycle.
To Stop Self-Clean
anytime:
Press STOP/CLEAR, and "cln," "ON," "cool" and "LOCKED" will
appear on the display until the oven cools. Then "End" will
appear and the door will unlock.
IMPORTANT:
Before cleaning, make sure all controls are off and
the oven and cooktop are cool. Always follow label instructions
on cleaning products.
Soap, water and a soft cloth or sponge are suggested first unless
otherwise noted.
EXTERIOR
PORCELAIN
ENAMEL
SURFACES
(on some models)
Food spills containing acids, such as vinegar and tomato, should
be cleaned as soon as the entire appliance is cool. These spills
may affect the finish.
Glass cleaner, mild liquid cleaner or nonabrasive scrubbing
pad:
Gently clean around the model and serial number plate
because scrubbing may remove numbers.
PORCELAIN-COATED
GRATES AND CAPS
Food spills containing acids, such as vinegar and tomato, should
be cleaned as soon as the cooktop, grates and caps are cool.
These spills may affect the finish.
To avoid chipping, do not bang grates and caps against each
other or hard surfaces such as cast iron cookware.
Do not reassemble caps on burners while wet.
Do not clean in the Self-Cleaning
cycle.
Nonabrasive plastic scrubbing pad and mildly abrasive
cleanser:
Clean as soon as cooktop, grates and caps are cool.
Dishwasher (grates only, not caps):
Use the most aggressive cycle.
SURFACE
BURNERS
Sealed Burner models
See "Sealed Surface Burners" section.
Open Burner models
See "Surface Burners" section.
COOKTOP
CONTROLS
Do not use steel wool, abrasive cleansers or oven cleaner.
Do not soak knobs.
When replacing knobs, make sure knobs are in the Off position.
On some models, do not remove seals under knobs.
Soap and water or dishwasher:
Pull knobs straight away from control panel to remove.
CONTROL
PANEL
Do not use abrasive cleaners, steel-wool pads, gritty washcloths
or some paper towels. Damage may occur.
Glass cleaner and soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly on
panel.
OVEN DOOR EXTERIOR
Glass cleaner and paper towels or nonabrasive plastic
scrubbing pad:
Apply glass cleaner to soft cloth or sponge, not directly on
panel.
For models with stainless steel oven doors, see "Stainless
Steel" section in "General Cleaning."
STAINLESS
STEEL (on some models)
Do not use soap-filled scouring pads, abrasive cleaners, Cooktop
Polishing Creme, steel-wool
pads, gritty washcloths
or some
paper towels. Damage may occur.
Rub in direction of grain to avoid damaging.
Stainless Steel Cleaner & Polish (not included):
See back cover for ordering information.
Liquid detergent or all-purpose
cleaner:
Rinse with clean water and dry with soft, lint-free cloth.
Vinegar for hard water spots
OVEN CAVITY
Do not use oven cleaners.
Food spills should be cleaned when oven cools. At high
temperatures,
foods react with porcelain and staining, etching,
pitting or faint white spots can result.
Self-Cleaning
cycle:
See "Self-Cleaning
Cycle" first.
OVEN RACKS AND ROASTING
RACKS
Self-Cleaning
cycle:
See "Self-Cleaning
Cycle" first. Remove racks or they will
discolor and become harder to slide. If this happens, a light
coating of vegetable oil applied to the rack guides will help
them slide.
Steel-wool pad
21

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents