READ THE INSTRUCTIONS
CAREFULLY BEFORE USING THE OVEN.
For satisfactory use of your oven, become familiar with the various pad features and functions of the oven as described below.
Up and down
Use with the
to enter the length of
feature or function
pads to set oven
baking time desired,
bake time, start time, clean time
to select the bake
setting or adjusting the clock and minute timer.
dear ...... dean ......
Use to set or cancel
timer does not
start or stop cooking.
used to set the
-- The "oven"
Use to set the
desired start time
for baking & Self-
Clean. May be used
will glow each time the oven turns on to maintain the set oven
light will glow when the oven is
first set to operate, or if the desired temperature
is reset higher
than the actual oven temperature.
flash when the oven door locks and unlocks, the oven door
lockout is active or when the self-clean cycle feature is active.
Use to set a
Clear off pad--
clear any feature
the time of day and
off to stop cooking.
Also use clear off to
Setting the clock
When the appliance is first plugged in or when the power
supply to the appliance has been interrupted, the display
will flash "12:00". It _srecommended to always set the
clock for the correct time of day before using the appliance.
To set the clock:
(°F or °C)
The electronic oven control is set to display °F (Fahrenheit)
when shipped from the factory. The oven may be
programmed for any temperature
from 170°F to 550°F
(77°C to 287°C).
Press clock once (do not hold key pad down).
Within 5 seconds, press and hold the
the correct time of day appears in the display.
The clock cannot be changed when the oven is set for
or clean is active.
display feature cannot be changed
when the oven is set for cooking or clean is active.
To change the temperature
°C (Celsius) or
from °C to °F:
Press broil. "----"
appears in the display.
Press and hold the A
until "HI" appears in the
Press and hold broil until °F or °C appears in the
Press the A
to change °F to °C or °C to °F.
Press any control pad to return to normal operating