Playback - JVC HR-J220U Instructions Manual

Playback lpo.INSTRUCCIONE EN
ESPANOL VEA p,30 - 31.
The easiest, most basic operation possible with your VCR is tape playback. Previously-recorded signals on a video tape are read by
your VCR and displayed on your TV just like a TV program.
REW
PLAY
STOP
1 6
POWER ON;
SELECT CHANNEL
3 OR 4 (OR AV MODE)
FF
PAUSE
PLUS
1
Insert a cassette with its window side up, and label side
facing you. Press gradually on the middle of the cassette
until the VCR pulis the cassette in.
• The VCR power will come on automatically.
• The counter will be reset to "OH00M 00S" automatically.
• If the safety tab on the cassette is absent, playback will
start automatically.
Press I_ (PLAY).
Press • (STOP).
Press -<1<1to rewind the tape.
Press _ to fast-forward the tape.
• Press • to stop the tape.
Press the VCR's •/-_ (STOP/EJECT) button again.
To view a still picture
During Playback...
[] Press PAUSE to view a still picture.
• If there is vertical picture jitter, press CH - or + (on the
VCR or remote control) to make the picture more stable.
[] To advance the picture frame by frame, press PAUSE again.
• For frame-by-frame playback in the forward or reverse
direction, press SHUTTLE PLUS F<-< or l_l_l in the
corresponding direction while in the still picture mode.
[] Press PLAY to resume normal playback.
To view a slow/fast-motion picture
During Playback...
[] Press the SHU'ITLE PLUS I.<<1 or I_IH button. Tape speed
will change in the corresponding direction.
• To increase the speed,press the button for the same direction.
• To decrease speed, press the button for the opposite direction.
• For forward slow motion playback, press PAUSE for more
than 2 seconds while in the still picture mode.
[] Press PLAY to resume normal playback.
Or...
During Playback...
[] Press FF for forward fast-motion, or REW for reverse fast-
motion.
[] Press PLAY to resume normal playback.
• For short searches, keep FF or REW pressed for more than
2 seconds. When released, normal playback will continue.
15