Notes Regarding - JVC HR-J220U Instructions Manual

If You Have Any Questions (cont'd)
Notes regarding...
Tuner Set
• Since receivable channels differ by locale, it will be necessary to
reset your VCR's channels when you move to another location. Auto
Channel Set is the easiest way to do this. _ p.13
Playback
• If the end of the tape is reached during play or search, it is
automatically rewound to the beginning and stops.
• The VCR automatically stops when still continues for more than 5
minutes.
• If the still picture is unstable, use the VCR's CH -/+ buttons to
correct the picture.
• During search playback, some noise bars will appear.
• If noise bars appear during playback or slow motion, correct using
manual tracking. _r p.16.
• There is no audio during search, slow, still, or frame-by-frame
playback.
• When playing back LP recordings in the search, still, or frame by
frame playback mode, the picture will be distorted, and there may be
a loss of colour.
• When a tape is first inserted, the recorder enters the automatic
tracking mode automatically.
• During multi-speed search, some noise bars will appear.
• If adjacent index codes are too close to each other, Index Search may
not function properly.
Recording
• To start recording with the VCR's Record button, press it once on its
own. Pressing Record more than once activates Instant Timer
Recording. _" p. 19.
• After pause, when recording is resumed, a few frames recorded
before the pause may be overlapped by the new recording. This is
meant to reduce picture distortion and is not a malfunction.
• The VCR automatically stops when record-pause continues for more
than 5 minutes.
• If the end of the tape is reached while recording, it is automatically
rewound to the beginning and stops.
• If the Record button does not work, check to see if the cassette's
safety tab has been removed.
• The channel cannot be changed while recording is in progress. 1o
change the channel, press Pause, then change the channel.
Timer-Recording
• When timer-recording is successfully completed, the VCR power is
automatically switched off.
• If the end of tape is reached while timer-recording, the cassette is
automatically ejected.
• Since the timer starts and stops recording based on the time being
kept by the VCR's built-in clock, the clock's time must be accurate
for correct timer-recording results.
• When you program the timer while viewing a program or a tape, the
TV screen will shox_ the on-screen menu but the audio will continue
to be heard.
• You can also program the timer while the VCR is recording; the on-
screen menu will nol be recorded on tape.
Remote TV Operation
• Whenever you replace batteries in the remote control, it is necessary
to reset the TV code if your television is not a JVC TV.
• With some televisions, the TV/VIDEO button functions only to
switch the TV to the VIDEO(AV) mode.
• Although the provided remote control unit is compatible with JVC
televisions as well as many TV models manufactured by others, it is
possible that the provided remote control will not work with your
TV.
Remote Cable Box Operation
• Whenever you replace batteries in the remote control, it is necessary
to reset the Cable Box code.
• Although the provided remote control unit is compatible with many
different Cable Box brands, it is possible that the provided remote
control will not work with your Cable Box.
28