JVC HR-J220U Instructions Manual page 22

Timer-Recording (cont'd)
MENU
SELECT SET
Auto Timer
What this feature does: Usually, the timer mode is not
engaged unless the TIMER button is pressed. But with AUTO
TIMER set to ON, the timer mode is automatically _ when
the VCR's power is turned off, and is _ whenever VCR
power is turned on again.
[] After step 12 (_:_rp.21), press AUTOTIMER
SET to choose "ON", and press ,0N
MENU. OFF
Or...
PRESS SET +/-)FOR CHOICE
[] Press MENU., SET, and PRESS MENU)TO END
SELECT as many times as _ '_
necessary to access the AUTO TIMER screen. (a:_ p.9)
[] Press SET to choose "ON".
[] Press MENU as many times as necessary to exit.
/
I
/CANCEL
/SELECT
MENU
_SET
To check and cancel programs
Make sure the timer mode is disengaged first. Then...
[] Press MENU and then press SELECT (to access the Program
Set screen).
[] Press SET to check through the programs in succession.
To cancel the program...
[] Press CANCEL.
• Repeat steps 2 and 3 as necessary.
[] Press MENU as many times as necessary to exit.
22