Dolby Pro Logic Ii; Dts; Features; Dual - JVC RX-7030VBK Instructions Manual

Audio/video control receiver
Hide thumbs Also See for RX-7030VBK:
Table of Contents

Advertisement

DoiKv Pro Lopic11
Dolby Pro Logic II is a multi-channel playback format to convert 2-
channel software into 5-channel (plus subwo_ff_r), l'he matrix-based
conve_ion methc_ used t'_" Dolby Pro Logic lI makes no limitation
for the cutoff f_uency
of the sttrmund treble and enables stereo
sttrround sound.
• This recelvar provides two types of Dolby Pro kx_gic II mc_es--
Pr_al_Jglc I1 Movie (J_Kli MOVIE) and I_, lmglc II Music
(yk[I MUSIC).
When Dolby I-_reLogic li is activated, the rlOPROLO_IT
indicate€ lights up on the display,
PLII MOVIE:
Suitable for playing any Dolby Surround
encc_ed software, You can enjoy a sound field
very"close m the one created with discrete 5,1 -
channel sounds,
PLII MUSIC:
Suitable for playing any 2-channel stereo
soAware, You can enjoy wide and deep sounds.
IITS* =
DTS is another digital signal comwession
method, developed by
DigitN 3_eater Systems, lnc. and enables nmlti channel enc_ing
and decoding (1ch tip m 6,1ch).
• When DTS signal is detected through the digitN input, the
[
_
] indicat_rr lights up on the display,
DTS Digital Surround
DTS Digital Surround (DTS) is another diacrete 5,1 channel _gital
audio f_vrmat available on CD, LD, and DVD software.
Compared to 1N)lby Digital, the DTS Digital Surround forn_t h,ts a
lower audio compression rate which enables it to add breadth and
depth m the sounds repr,_uced,
As such, 1.)TS Digital S_rmund
features na_ral, solid, and clear sound,
• When EX/ES set.rig is set to '*ON." 1.)TS Neo:6 (DTS NEO:6) is
applied while playing back multi-channel DTS sotlware, it areates
the s_ae sttrround ambience as 6.1 _channel software does,
DTS Extended Surround [DIS-ES)
DTSES
is another multi-channel
digital encoding format.
It greatly improves the 36%dagree surround impression and space
expression by a_ding the third surround channel---sttrround
back
channel.
DTSES
includes two signal formats with different surround signal
recording methods
ttTS-ES
Discrete 6.1ch (ES DSCRETE) and
DTS-ES Matrix 6.1ch (ES MATRIX),
DTS-ES IYtseretc 6.1 ch has been designed to encode (and decode)
a 6.1 channel signal discretely m avoid interference with each
channel.
DTS-ES Matrix 6Ach has been designed to add an extra sttrreund
channel m DI'S Digital St_rround hA-channel, By using a matrix
enc_mgldacc_mg
method, an a_dit_on al "sttrmund back" channel
signal is enc_ed
(and decoded) in both the left and right surround
channel signals,
• You can use Virtual 6A-channel surround whan playing back
D FS-ES software without connecting the surround back speakers,
This sttrround realloeates the surround back channel m the
surround speakcws so that you can still feel the great sttrmund
effect from behind.
The VIRTUAL SB (Sttrround Back) indicator lights up on the
display,
DIS 96/24
In recent years, thare has been increasing interest in higher sampling
rates bot_ fee recording and for rewoducing at home, Higher
sampling rates allow widar frequency range and greater Nt depths
provide extended dynamic range,
DTS 96/24 is a multi-channel digital signal fo'rmat (fs 96 kHzd2A
Nts) introduced by Digital I'beater Systems, Inc. to delivar "bat_o>
than-CD sound quality" into the home.
- When 1.)TS 96/24 signal is detected, the 96[24 indicator lights tip.
You can enjoy its 5A-channel sound with fu11-qtlalitg
DIS Nee:6
DTS Neo:6 is another eonvarsion method to create (>channel {plus
subwoot'er) t_mmanalogldigital 2-channel s_Rware by u_mg the high
precision ddigitalm_ix
dec_er
used fee DTS-_
Ma_lx 6ACh.
When one og Neo:6 m_es
is activated, the NEO:6 indicate€ lights
up on the display.
- l'his receiver provides the folIowing DTS NEO:6 modes--Nea:6
Ci.e_a
(NEO:(_'INMA)
and Neo:6 Music (NEO:fMUSIC).
NEO:6CINMA:
Suitable fee playing movies. You can get the
same atmo@are
with 2 channel software as
with 6A -channel software, It is also effective i'_r
playing software encoded with conventional
sttrmund formats.
NI_'_O:6M[NIC:
Suitable for Naying music software, l'he front
channel signals bypass the dec_er
(resalting in
no loss of sound quNity) and the surround
signals Wansmitted through the ot_or speakers
expand the sound field natarally.
What is thml Mona?
Dual Mono can be easily und_vtstood when you think of the
bilingual broadcast c¢ the MTS (Multichannel
lblevision Sound)
tlsed for I'V programs (howevar, the Dual Mono format is not
identical with those analog g_maats),
l'his fc_rmat is now adopted in 1N)lby Digital, DTS, and so om It
allows two independent channels ¢called main channel and stth-
channel) to be reco_ed
separately.
• When Dual Mono signal is detected, the DUAL indicator lights
up, You can select either channel you want m listen m (see page
29).
When u_mg the Su_outal
mode,
the sotmds
come out of the
avlivated
speake_
which
the St_tmd
mode
requires.
- If the sur_tmd
speake_
nod center speaker
are set to
"NONE"
in the speaker
setting,
JVC's
original
3D-PHONIC
Wocessing
(which
has been developed
to create the sttrmund
effect through
the front speakers
only) is used.
l'be 3D-PHONIC
indicator
lights up on the display.
*_ Manufactured
under license from Dolby Laboratories.
"Dolby', _Pre
Logi_'; and the doeble-D symbol are trademarks of Dolby
Laboratories,
*_ "DTS; "DT&_S
Extended Surround"and"Nee:6
,are trademarks
of Digital Theater Systems, Inc.
35

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx-7032vslRx-8030vbk

Table of Contents