Basic Setting Items; Speakers Number And The Size; Room Size And The Speaker Distance - JVC RX-7030VBK Instructions Manual

Speakers [chennelsl number end the size
You can find how each of the speaker size is defined accenting to
the number of connected speakers (speaker channel (CH) number)
you select.
In the following tables, "L" stands for "left front speak_rr:' "R, for
'Mgbt front speaker}' "C" fc_r"cente_ spewer}' '%S" for "left
st_rround speakerY "RS" for "right swound speaker}' "SB" for
%trrzound back speakc_r} ' and "SI2_WFR" for %ubwoofor?'
• Subw_mthr is counted as &l channel.
The size of connected speakers
CH
L R C LS RS SB SUBWFR
2.0 LARGE LARGE NONE NONE NONE NONE NO
2.1 SMALL SMALL NONE NONE NONE NONE YES
3.0 LARGE LARGE SMALL NONE NONE NONE NO
3.1 SMALL SMALL SMALL NONE NONE NONE YES
4.0 LARGE LARGE NONE SMALL SMALL NONE NO
4.1 SMALL SMALL NONE SMALL SMALL NONE YES
5.0 LARGE LARGE SMALL SMALL SMALL NONE NO
5.1 SMALL SMALL SMALL SMALL SMALL NONE YES
6.0 LARGE LARGE SMALL SMALL SMALL SMALL NO
6.1 SMALL SMALL SMALL SMALL SMALL SMALL YES
7.0 LARGE LARGE SMALL SMALL SMALL SMALL_ NO
7.1 SMALL SMALL SMALL SMALL SMALL SMALL_ YES
* This se_ng is applied to the both speakers.
Room size and the soeaker distance
Acceding to the sdiected room size, speaker distance t'_r each
activated speaker is set as follows:
LARGE Speaker Distance
k 3.0 m (10 ft)
R 3.0 m (10 ft)
C 3.0 m (10 ft)
LS 3.0 m (10 ft)
RS 3.0 m (10 ft)
SB 3.0 m (10 ft)
MID
Speaker l)L_tance
L 2.7 m (9 ft)
R 2.7 m (9 ft)
C 2,4 m (8 ft)
LS 2,1 m (7 ft)
RS 2,1 m (7 ft)
SB 1.8 m (6 ft)
SMALL
Speaker l)L_tance
L 2.4 m (8 ft)
R 2,4 m (8 ft)
C 2,1 m (7 ft)
LS 1.5 m (5 ft)
RS 1.5 m (5 ft)
SB 1.2 m (4 ft)
On the folIowing pages, you can 'adjust the following items:
Items To do See page
SUB WOOFER *_ Register yotrr subwoofer. 27
FRONT SPEAKER *t Register yotrr front speak_rr size. 27
CNTR SPEAKER *_ Register yotrr center speaker size,
27
SURR SPEAKER *_ Register yotrr surround speaker size, 27
SBACK SPEAKER *_Regisa_ yo_ surround back
speak_rr size. 27
SBACK OUT .1
Register the number of the
connected strrmund back speak_rrs. 27
DIST UNIT Select the recasting anit for the
speak_rr distance. 28
FRONT DISTANCE < Regisa_ the distance from you front
speak_rrs m your listening point, 28
CNTR DISTANCE*' Register the distance from you center
speak_rr m yotrr listening point, 28
SURR DISTANCE *_ l_egi_t_ the distance fr,*_myou
surround speak_rrs m your listening
point. 28
SBACK DISTANCE *_Regi_t_ the distance from you
surround back speaker(s) m yotrr
listening point, 28
S WFR OUTPUT Select sounds emitted _mm the
subwoofor, 28
CROSS OVER Select the catoff _mquency m the
subwoofor, 28
LFE ATTENUATE
Attenuate the bass (LFE) sounds. 29
DUAL MONO Select the Dual Mono sound
channel, 29
DGTL IN COAX Select the component connected m
digital coaxial terminal 29
DGTL IN OPTICAL *_Select the components connected to
digitN opt_caI terminNs 29
VIDEO IN DVD Select the type of video terminN
used t'{yrthe D'vq) Nayor, 30
VIDEO IN DBS Select the type of video terminal
used t'{_rthe DBS tuner. 30
ONE TOUCH OPE Store the volume level for each
sotrrce. 30
Notes:
_ These items can be sot using Quick Speaker Setup.
_ This setting is only for RX-803OVBK,
For RX*7030VBK/RX-7032VSL, it is automatically set according to
yOar"DGTL IN COAX" setting.
26