Adjusting The Equalization Patterns; Adjusting The Speaker Output Levels; Adjustable Speakers - JVC RX-7030VBK Instructions Manual

Adjusting the Equalizatian Patterns
You can adjust the equalization patterns to your IVrC fercnee,
• Once you have made adjustment iI is memudzed far each sut_rce.
• Eaualization adiu_ment_DIGIrAL EQ
Yau can _just five f_uency (63 Hz, 250 Hz, 1 kIfz,
4 kHz, 16 kHz) within the range of-8 dB to +8 dB (_'0 dB" is
Ihe initial setting) in 2 dB steps.
• When _justment ismade, theD1Gl'l_L EQ indic_ceHghts
tip on the display,
Ta Ilat Ihe equ_ization pattern, set all the f_equency to '_3dB"
in step 4 of "B_s_c Procedure" (on page 3 I). 3_e D1GYI_L EQ
indicat_rr goes off tgom the display,
Notes:
• When Analog Direct is in use, Digital Equalization patterns are not
available.
• The Digital Equatfzatiec affects the front speaker sounds ablY..
You cam also rise the remote control f_ e_ .lalJzatian
adjustment,
1. Press SOU NI).
'l%e 10 keys arc ant_vated fur sound adjustments.
2. Press tHGITAL EQ (Equalization) repeal_dl_ I_ select
Ihe center frequency you want te adjust_
• Each time you press the button, the center frequency with
JIs current level appeau"on the di@ay
3. Press LEV EL + or - repeatedly la adjt_t Ihe level af Ihe
center frequency,
l%e DIG I'17_LEQ indimatc¢ lights alp on the display.
• The freqtlency level changes tgom -8 dB m +8 dB in 2 gB
steps,
4. Repeat steps
2 and 3 to adjt_st the other t_tat_r
freqnetaey.
Adjusting the Speaker Output Levels
You can adj_lst the s_ak_ output levels, l'he test tone comes out of
each speaker except subwoofer to check the output level ba/lance
when using the Summnd mode.
- Once you have made an _jusm_ent, it is memurized fur each
solxrce.
• Adiustable soeakers
You can adjust the fcqlowing speakers' output levels within the
range of-10 dB to +10 dB (_'0 dB" is the iffltlal setfiag):
SUBWFR INL: Select to adjust the subwoofor output level.
FRONT L LV L: Select m adjust the left _runt speaker
output level.
FRONT R LVL: Select m adjust the right front speaker
output level.
CENTER INL: Select m adjust the center speaker output
level,
SURR L INI,: Select to adjust the left sttrmund speaker
output level.
SURR a I,VL: Select m adjust the right surreund speaker
output level,
SBACK LV L: Select to _just the surround bank speaker
output level,
Notes:
• ffyou hma9 setected "NO _or "NONE" for a speaker (see page
27), the output leval for the corresponding speaker is net
adjustable.
• The center speaker, and felt!right surround speak_rs'output
levels are adjustable for DVD MULTI playback mode, evgn
though "NONE" is selected for the speaker settings.
• Speaker output fevafs (except the subwoefer output level) are
not adjustable when Analog Direct is in use. To adjust
sub_9ofer output levi, see page 19.
32