Jenn-Air JER8785QAF Use & Care Manual page 12

÷
÷
To set Bake:
1. Press the Bake pad.
, BAKE will flash.
, 000 will flash in the dispHay.
Bake
J
Autoset
2. SeHectthe oven temperature. Press the Autoset 0 pad for
350 ° F or the appropriate number pads.
Each additiona[ press of the Autoset 0 pad wi[[ increase
the temperature by 25°.
, The oven temperature can be set from 170° to 550 °.
3. Press Bake pad again or wait four seconds.
BAKE will stop flashing and Hightin the dispHay.
° 100° or the actuaHoven temperature if over 100° F will
dispHay. It will rise in 5° increments untiHthe preset
temperature is reached.
4. AHow the oven to preheat for 8-15 minutes.
3.
° When the set oven temperature is reached, one Hong
beep will sound.
° The set temperature will display.
° To recall set temperature during preheat, press Bake pad.
5. Place food in the oven.
6. Check cooking progress at the minimum cooking time. 4.
Cook longer if needed.
7. When cooking is finished, press CANCEL pad.
_LLL
8. Remove food from the oven. .......................
Baking Notes:
° To change the oven temperatare daring cooking, press
Bake, then press the Autoset 0 pad or appropriate number
pads until the desired temperature is displayed.
, To change the oven temperatare daring preheat, press
the Bake pad twice, then press the Autoset 0 pad or
appropriate number pads until the desired temperature is
displayed.
° If you forget to turn off the oven, it will automatically turn
off at the end of 12 hours. If you wish to deactivate this
feature, see page 18.
° For additional baking and roasting tips, see "Cooking Made
Simple" booklet.
Baking Differences Between Your Old
and New Oven
It is normal to notice some baking time differences between a
new oven and an old one. See "Adjusting the OvenTemperature"
on page 19.
Baking with Convection
(select models)
When convection baking, enter your normal baking
temperature° The control will automatically reduce the set
oven temperature by 25°. The entered temperature will be
displayed ..........................
To set Conveet Bake:
Bake
1. Press the Convect Bake pad.
, BAKE and the FAN icon will flash .... v
, 000 will flash in the display. , Autoset
2. Select the oven temperature. Press the Autoset 0 pad for
350° F or the appropriate number pads.
, Each additional press of the Autoset 0 pad will increase
the temperature by 25 degrees. The oven temperature
can be set from 170° to 550°.
Press Convect Bake pad again or wait four seconds.
, BAKE will stop flashing.
, 100° or the actual oven temperature if over 100° Fwill
display. It will rise in 5° increments until the preset
temperature is reached.
, The FAN icon will start to rotate.
Allow the oven to preheat for 8-15 minutes.
, When the set oven temperature is reached, one long
beep will sound.
, The set temperature will display.
, To recall the set temperature during preheat, press the
Convect Bake pad.
5. Place food in the oven.
6. Check cooking progress at the minimum cooking time.
Cook longer if needed.
\,
7. When cooking is finished, press CANCEL
CANCEL pad.
8. Remove food from the oven.
÷
11
8113P417-6OB 12 _ 9/28/04, I1:40 AM