Product Assembj - Champion C44F Owner's Manual

ASSEMBLY INSTRUCTION
PAGE 6
ASSEMBLY STAGE #1
Attach Stabilizers to the Main Base
l Recommended: Apply thin coat of silicon lubricant to the top Of the base rails
Assembly Hardware Required:
#34 Button Head Allen Bolt Qty. 2 #35 Flat Washer
#37 Hex Head Bolt Qty. 4 #36 Acorn Nut
Qty. 6
Qty. 4
Assembly Description:
A) Securely _hsten the Front Stabilizer Assembly (# 1) to the Base Assembly (#2) using 2-Button Head Allen Bolts (#34) and
2- Flat Washers (#35).
B) Attach the Stabilizer Extension Assemblies (#4) to the rear flame extrusion of the Base A_ssembb" using 4-Hex Head Bolts
(#37), 4-Flat Washers (#35), and 4-Acom Nuts (#36) as shown above.
Assembly Notes: Use the Adjustable Levelers located on the bottom of the Stabilizer End Caps to level the equipment and prevent
the base unit from rocking on an uneven surthce.
We also recorrnnend using a silicon lubricant to coat the base rails. This will smooth the travel of the pedal movement, as well as,
eliminate any tracking or noise problems that may be caused by the roller material.
• A_ssembly Stage #1 complete