Troubleshooting - Champion C44F Owner's Manual

PAGE 19 TROUBLESHOOTING
PROBLEM DESCRIPTION
SUGGESTED SOLUTION
1. NO DISPLAY
(E-2 ERROR ('ODE)
1.1 CHECK AC ADAPTER FOR PROPER VOLTAGE OUTPUT 0-12 VDC).
1.2 INSPECT RECEPTACLE ON THE FRONT OF THE UNIT FOR DAMAGE.
CHECK CABLE CONNECTIONS: MAKE SURE CONNECTIONS ARE SECURE
1.3 AND INTHE CORRECT ORIENTATION.
CHECK CABLE ASSEMBLIES FOR DAMAGE: PINCH POINTS & POSSIBLE
1.4 SHORTING OF WIRES.
CHECK FOR POSSIBLE COMPUTER DAMAGE: CRACKED DISPLAY WINDOW
1.5
(BLACK SCREEN).
. If computer stillfails to operate after checking these suggestions, contact us for
technical support.
2. POWER, BUT NO COMPUTER
READINGS
CHECK COMPUIER CONNECTION: MAKE SURE CONNECTORS ARE SECURE
2.1 AND IN THE CORRECT ORIENTATION.
CHECK FOR THE POSSIBILITY OF PINCHED WIRES, WHICH COULD SHORT
2.2 CABLE CONNECTION.
USE LEVELERS ON THE BOTIOM OF THE STABILIZERS TO ADJUST
3. PRODU(_T WILL NOT SIT LEVEL 3.1
EQUIPMENT TO UNEVEN SURFACES.
4. PIVOT ARM / FOOT PEDAL
WOBBLE
CHECK TO MAKE SURE ALL CORRESPONDING PIVOT MOUNTING
4.1 HARDWARE HAS BEEN SECURELY TIGHTENED.
4.2 REVIEW ASSEMBLY STEPS AND MOUNTING HARDWARE
5. ROLLER NOISE OR TRA(_TG
PROBLEM 5.1 LUBRICATE THE TOP OF THE BASE RAILS WITH SILICON LUBRICANT.
6. ERRATIC HEART RATE
(E-1 ERROR ('ODE)
6.1
6.2
MAKE SURE PALMSOF HAND ARE CENTERED ON GRIP SENSORS.
CHECK CABLE CONNECTIONS FROM HANDLE BAR ASSEMBLY TO THE
COMPUTER.
NOTE: ELLIPTICAL UNITS OPERATE WITH AN AGGRESSIVE USER
MOVEMENT. THIS SOMETIMES EFFECTS THE CONSISTENCY IN USER'S HAND
PLACEMENTON THE GRIPS. IF HR READINGS ARE RAPIDLY FLUC]X;ATING;
SLOW DOWN TRAINING STRIDE AND CONCENTRATE ON CONSISTENT HAND
PLACEMENT ON THE GRIP SENSORS.
NOTE: A USER'S PHYSICALCONDITION CAN EFFECT THE ACC[JRACY OF A
READING, AS WELL AS, UNCONTROLLABLE INTERFERENCES.
Make sm'e to reference the assembhi steps & parts information in this manual when performing any ta-oubleshoofmg.
If you exvperienceother technical problems th at apenot listedor have additional questions,please contact us : 1.877.861.2181