Champion C44F Owner's Manual page 13

ASSEMBLY INSTRUCTION PAGE 12
ASSEMBLY STAGE
#7
Attach Upper Pivot Covers & Water Bottle Cage
Assembly Hardware Required: (*Hardware Preinstalledin theAssembh_ Parts)
#51 Truss Screw _ QD:- 4 #52 Self-threading Screw
Assembly Description:
Qty. 4
Assembly Note: Before attaching the Pivot Cover_ check the Pivot Arm mounting hardware to make sure it has been
tightened properh,.
A) Mount the Upper Front Pivot Covers (# 16 & # 18) to the front end of the Ph'ot Arms (#8 & #9) using 1-Truss Screw* per
cover.
B) Attach the Upper Rear Pivot Covers (#15 & #17) using 1-Truss Screw* (#51) and 2-Self-Threading Screws (#52) per side
as shown.
C) Attach the Bottle Cage (#32) to the Handlebar Mast (#5) using the 2-_eviously installed Truss Screws (#51). Once the cage
has been mounted_ insert the Sports Bottle (#33).
• A_ssembly Stage #7 complete