Hotpoint RB787WC2WW Owner's Manual And Installation Instructions page 39

www.GEAppliances.com
Possible Causes What To Do
Self-Cleaning Models
Oven will not self-clean The oven temperature is too "Alh)w the range to (eel to room temperature and
high to set a self-clean operation, reset the controls.
Oven controls improperly set. "Make sure you turu the (oi_trol ki_ob all the w,ly to the
CLEAN position.
Oven door is not in the locked "Make sure you inove the door latch handle all the way to
position, the fight.
Oven starts a self-clean Oven door locked during "Turn the Oven Temperature knob to OFF.Allow the
cycle when you wanted cooking, oven to (ool. Never fi)r(e the door lat(ll handle.
to bake, roast or broil
"CracklingS'or This is the sound of the metal * This is imrlnal.
heating and cooling during both
the cooking and cleaning
functions.
Excessiv e smoking Excessive soil. "Turn the Oven Temperature knob to OFF. Open the
windows to rid the rooln of slnoke. Wait until the
CLEAN light goes off. Wipe up the ex(ess
soil and reset
the clean
cycle.
CircuWave fan is on. "Make sure the f_m is off during the self-clean
cycle.
Oven door will Oven too hot. • Allow the oven to (ool below lo(king temperattlre.
not unlock
CLEAN light is on when The oven door was accidentally • Turn the Oven Telnperature knob to OFF.Alh)w the
Yon want to COOk locked, oven to (ool. Never for(e the door lat(h handle.
Oven not clean after a Oven controls not properly set. "See Usingtheself-cleaningovense(uou.
clean cycle
Oven was heavily soiled. "(lean up hea W spilh)vers before starting the (lean
(y(le. Heavily soiled ovens may need to self-(lean
again or ti)r a hmger period of time.
CLEAN light flashes Oven controls not properly set. *Move the door lat(h handle to the right before setting
the Oven Temperature knob to CLEAN.
39