Before You Begin - Hotpoint RB787WC2WW Owner's Manual And Installation Instructions

Installation Instructions.
Read these instructions completely and carefully.
BEFORE YOU BEGIN
IMPORTANT Save these instructions for the local
electrical inspector's use.
IMPORTANT OBSERVEALL GOVERNINGCODES
AND ORDINANCES.
NOTE TO INSTALLER: L eave these instructions with
the appliance after installation is completed.
NOTE TO CONSUMER:Keep this Owner's Manual
and Installation Instructions for future use.
NOTE."This appliance must be properly grounded.
TOOLS YOUWILL NEED
i:yPhillips s_rewdriver
i_:l/4" hex head nutdriver
>_(_hannel lo(k pliers
_i 3/16" open-end or socket x_¢ench
i_y Open-end or ac!justable _ench
>_Tape measure
ELECTRICAL REOUIREMENTS
CAUTION, FORPERSONALSAFE_." DO NOT USE
AN EXTENSION CORDWITH THISAPPLIANCE.
REMOVE HOUSE FUSE OR OPEN CIRCUIT
BREAKERBEFOREBEGINNING INSTALLATION.
This appliance must be supplied with the proper
voltage and flequen( T, and connected to an
indivi(hml, properly grounded b_tnch drcuit,
protected by a circuit breaker or time del W fi]se,
as noted on the rating plate.
W/kingmust conform to National ElectricCodes.
If the elecuic service provided does not meet the
above specifications, have a licensed electrician
install an approved outlet.
Because range terminals are not accessible after
range is in position, flexible sep&e (on(hilt or (ord
must be used.
28