Taking
Pictures
in I_1 (Auto)
Mode
This section describes how to take pictures in a
(auto) mode.
1
Turn the camera on,
II
Slide the ON/OFF switch to turn the camera
on,
2
Select a
mode,
Rotate the mode dial to a.
3
Check the battery
level,
Check the battery level in the display.
Indicator I
Description
NOICON IBatteries are partially discharged.
(]}) _
Batteries are low.
Replace as soon
(red)
as possible.
(_) _
Batteries are exhausted.
Turn cam-
(blinksred) era off and rep ace batteries.
• r- Note
A battery warning may not be displayed before the camera turns off, particularly if batteries are reused after
having once been exhausted. Power consumption varies greatly from mode to mode; tile low battery warning
(€_:1) may not be displayed or may be displayed only briefly before tile camera turns off in some modes or when
switching from shooting to playback mode.