[] White Balance - FujiFilm FINEPIX S1500 Owner's Manual

U<_ing the*M<*nu_;: .!;hooting Mod<*
[] WHITE BALANCE
For natural colors, choose a setting that matches
the light source (for an explanation of "white bal-
ance," see the Glossary on page 108).
Option
AUTO
-÷:.
-b.-
Description
White balance adjusted automatically.
Measure a value for white balance.
For subjects in direct sunlight.
For subjects in the shade.
Use under "daylight" fluorescent lights.
Use under "warm white" fluorescent lights.
Use under "cool white" fluorescent lights.
Use under incandescent lighting.
If AUTO does not produce the desired results
(for
example, when taking close-ups), select c], and
measure a value for white balance or choose the
option that matches the light source.
• r- Notes
• At settings other than .o., auto white balance is used
with tile flash. Lower tile flash (pg. 26) to take pic-
tures at other settings.
• Results vary with shooting conditions. Play pictures
back after shooting to check colors in the monitor.
• =o: CustomWhiteBalance
Choose ,o, to adjust white
balance for unusual lighting
conditions. The options at
right will be displayed; frame
a white object so that it fills
the monitor and press the shutter button all the
way down to measure white balance.
If'COMPLETED!" isdisplayed,press MENU/0K to set
white balance to the measured value. This value
is stored even when the battery is removed and
can be reselected by pressing MENU/OK when cus-
tom white balance options are displayed.
If"UNDER"isdisplayed, raiseexposure compensa-
tion (pg. 41)and try again.
If"OVER" isdisplayed,lower exposure compensa-
tion and try again.
%.Tip
To give a deliberate color cast to your photographs,
measure a value for custom white balance using a col-
ored instead of a white object.
72