Vcr Functions - Hitachi 27CX4B Operating Manual

USING THE GENIUS REMOTE TO CONTROL VCR FUNCTIONS
OPERATING THE PRE-GODED FUNCTION FOR YOUR
VCR.
This Genius Remote is designed to operate different types of VCRs. You must first program the Genius Remote to match
the remote system in your VCR. (Refer to Table 1 on page 32 or Table 3 on page 33.)
1. Set the MULTI-PAGE select switch to "VCR."
2. Set the USE/LEARN mode select switch on the rear side of the Genius Remote to 'USE." (For CLU-851GR only)
3. Turn ON your VCR.
4. Aim the Genius Remote control at the front of your VCR.
5.
While holding down the SELECT button, press the button that matches your VCR as shown on page 32 or page 33.
Continue to hold down both buttons. The channels of the VCR will begin changing when the correct button is
pressed. When this occurs, the Genius Remote Control is programmed for your VCR. If the VCR channels do not
change after 5 seconds, try a different Genius Remote button.
6. Release both buttons when the VCR starts to change channels. The Genius Remote will now control your VCR.
®
®
NOTES:
1. Ifyour VCR cannot be operated after performing
the above procedures,this means that your
VCR's codes have not been precodedintothe
GENIUS REMOTE. Please store your VCR
codes in memory by using the USER mode.
(Refer to page 34.)
2. The GENIUS REMOTE CONTROL will remem-
ber the codesyou have programmed in untilthe
batteries are removed from the GENIUS RE-
MOTE CONTROL. After replacingthe batteries
repeat theentireprogramming procedure stated
above.
3. If you have a play back only VCR (no CH UP/
DOWN function), please follow operatingstep5
describedaboveand thenchecka VCR function
until y ou findthebutton thatwillallowtheprecoded
VCR buttons to operate your VCR.
PRECODED VCR BUTTONS
These buttons always transmit the chosen precoded
VCR codes.
SELECT BUTTON
This is for setting up the Genius Remote to transmit
the VCR's remote codes.
EXCLUSIVE TV BUTTONS
These buttons are for operatingthe TV.
Q
POWER
READY LEARN
ITWW.II II II 6 I!
HITACHI
GENIUS REMOTE
CLU-851GR
3O