Using The Remote - Hitachi 27CX4B Operating Manual

USING THE REMOTE TO LEARN ADDITIONAL FUNCTIONS
NOTE:
1. To operate your TV, be sure to point the Genius Remote at the remote sensor on the television. To operate other
electronic equipment like a VCR, point the remote at the sensor on the device.
2. Refer to the instruction manual of the VCR for operation on the buttons exclusively for the VCR.
3. Be sure to keep the original remote transmitter even after storing its codes in the Genius Remote Control.
4. If the Genius Remote is left with its batteries removed, the learned codes in its memory are erased and will have
to be reprogrammed into the memory.
5. The Genius Remote Control may not be able to learn certain special remote codes.
CAUTION ON BATTERIES:
1.
2.
3,
The Genius Remote Control is working when the LEARN indicator lights up when a button is pressed.
When you press a button and the learn indicator will not light up or if the operation is extremely slow, this is an
indication that the batteries should be replaced.
Even if the batteries seem dead, do not remove them until you have replacement batteries ready to put in. The
codes stored in memory will be erased in a few minutes without power. When replacing batteries, prepare the
new ones first.
3-7