Channel Selector - Hitachi 27Cx4B Operating Manual

®
HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV
MENU, ENTER, and CURSOR buttons
All the On-Screen display features can be set or adjusted by using these buttons.
The "MENU" button wilt start or exit the On-Screen display.
The "CURSOR" buttons will highlight functions or adjust different features.
These buttons are also used for FAVORITE CHANNELS. (See page 43 .)
The "ENTER" button will set features to your preference.
"CHANNEL SELECT" buttons are used to set the time, channel memory, etc.
®
CHANNEL SELECTOR buttons
Enter two or three numbers to select channels. Enter a"0" first for channels I to 9. Use the "100" button for channels
100 and higher.
Channel selection may also be performed by pressing channel up ( • ) or down ( • ).
I NOTE: The TV may not receive some channels if you are not in the correct AIR/CABLE mode. See page 40.
Q AVX button
The AVX (Auxiliary Video) button wilt select between the antenna signal and the three sets of video input jacks each
time the button is pressed.
AVX
VIDEO:I
(S-tN)
AVX AVX
O O
I
VIDEO:3
AVX
O
(Except Model 27CX3B)
VIDEO:2
26