Operations - Haier XQB60-91BF User Manual

XQB60-91BF MANUAL 10/22/01 11:42 AH/_ge 15
iiiiiiiiiiiiiiiiiii
Selecting Wash/Rinse Temperature:
When you turn the power "ON", the initial temperature is
set at "Cold/Cold" position.
Press the "Temp Select Button" to select the proper temperature
option, For your convenience, there are three temperature
options: Cold/Cold, Warm/Cold and Hot/Cold,
COLD/COLDII_
WARM/COLD_
HOT/COLD_
Always refer to the label on the garment for proper
temperature that is recommended by garment manufacturers See the reference
chart below to select proper temperature for the fabrics
WASH/RI NSE
Cold/Cold
Warm/Cold
Hot/Cold
TYPES OF FABRICS
Non-colors Fabrics, lingerie
with light or normal soil
clothes & special care fabrics
Delicate & colors Fabrics
Sturdy whites & colors
Fabrics such as work & play
clothes, soiled fabrics
Note: When selecting hot water option for your load,
• Incoming hot water must not exceed over 140 Degree [/60 Degree C.
• If the incoming hot water temperature exceeds over level shown above,
the display will show 'E5" error code and it will beep
• You must let the hot water cool down below the temperature level shown
above. Once the hot water has cooled down, you must press
"Start/Pause" button to resume the cycle again,
Start/Pause Button:
After selecting your options and closing the washer door properly, you need to
press the Start/Pause button to start the washer
If you want to pause during the cycle operation, simply press "Start/Pause" button.
This will stop the activity during the cycle operation until you press this button again
to resume the cycle.
14