Aastra CNX Quick Installation and Setup Guide
Introduction
What is in the Aastra CNX shipping package?
The Aastra CNX is carefully and securely packaged within the shipping container.
Upon opening the shipping package, inventory the contents to be sure there are no
missing or damaged parts. The following parts are included:
•
One Aastra CNX unit
•
One Power cable (for connection to AC power source)
•
One DB-9 to DB-9 console cable
•
One CompactFlash memory card that contains the software required to
operate the unit (for use in CompactFlash memory slot 1)
•
One set of rack mounting brackets with six Phillips head screws
•
One Aastra CNX Technical Documentation CD ROM
•
One CD ROM envelope with License Key label
For a list of additional parts that you need to install the Aastra CNX (which are not
included in the shipping package), see the section,
Setup Procedures"
1 2 3 4
POWER
1
2
ACTIVE
STATUS
ALARM
10/100 ENET
T1 / E1
1
COMPACTFLASH
Aastra CNX unit
CompactFlash card
Rack mounting brackets with
Phillips head screws
xiv
on
page
1.
CNX
2
Technical documentation CD ROM
"Aastra CNX Installation and
Power cable
License Key
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06
Console cable
License Key: 996-555-1e9-f6
License Key: 996-555-1e9-f6
License Key: 996-555-1e9-f65-421-e85
CD ROM envelope with
license key label