GE PDCS1NBWARSS Owner's Manual And Installation Instructions page 30

mnstaliation mnstructions
REMOVING THE DOORS
(Double Door Refrigerator Models only)
IMPORTANT NOTES
NOTE: Door swing is not reversible.
• Read the instructions all the way through
before starting.
• Handle parts carefully to avoid scratching
paint.
• Set screws down by their related parts to
avoid using them in the wrong places.
• Provide a non-scratching work surface for
the doors.
IMPORTANT: Once you begin, do not move
the cabinet.
These instructions are for removing the
doors.
Unplug the refrigerator from its electrical
outlet.
Empty all door shelves, including the dairy
compartment.
TOOLS YOU WILL NEED
Adjustable Wrench 3/8" and 10 mm Socket
Ratchet/Driver
Masking Tape
Thin-blade Screwdriver
Phillips Screwdriver
[] REMOVE THE
REFRIGERATOR DOORS
[] Tape the doors shut with masking tape.
(for water dispenser models)
[] Start with right-hand door first: Remove
the screw securing the center hinge cover,
lift the hinge cover and place to the side
on top of the refrigerator.
Remo__
(for water dispenser models)
[] Remove water coupling and power
coupling.
Water Coupling
Remove the metal spring _-_
clip. Use a screwdriver to --_}[_-_._
push the red plastic locking "_- ]
clip down and off. _,
Water Coupling
Push red collar
g
and hold. Pull tub'e__
Power Coupling
Black mark
flush with
collar assembly
Pull apart power
coupling to
disconnect
30