GE PDCS1NBWARSS Owner's Manual And Installation Instructions page 15

Trimkits and decoratorpanels.
For panel required models
Read these instructionscompletely and carefully.
Before YouBegin
Some models are equipped with trim kits that aflow you to install door panels. You can order
pre-cut black or white decorator panels from GE Parts and Accessories, 800.626.2002, or you can
add wood panels to match your kitchen cabinets.
Panels less than 1/4" (6 mm) thick
_,_]_en installing wood panels less than ]/4" (6 ram) thick, you need to create a filler panel, such as 1/8"
cardboard, that will fit between the face (4 the door and the wood panel. If you are installing the we-cut
decorator panels, i)re-cut filler panels are included in the kit. The combined thickness of the decorator
or wood panel and the filler panel should be 11/32" (8.7 ram) with the panel itself being no larger than
1/4" (6 ram).
Panels1/4"thick oriess
1/4" max
The handle and the top and bottom tcim stand in front of the surii_ce of the do()); which requires that the
filler be smaller in lenoth_ and width than the panel. Use the gtfidelines below and tape the filler onto the
back of the panel.
LeftFreshFood Door
Filler
J
3/4" 19mm
3/4" (19turn)
2 1/2" 63.5rnm
!
V
RightFresh FoodDoor
V
Filler _"A,--
i
3/4" (!9 mrn)
-_' _, 3/4"(19mm)
iii"ii_s,,m)
Panel '_ _
Panel "_ ,&
Freezer Door
Fi,,er .... ili! I¸!? d ¸/ ; :;£
Panel _ /5