Models Only) - GE PDCS1NBWARSS Owner's Manual And Installation Instructions

Bottom freezers refrigerators models 21 and 25
Hide thumbs Also See for PDCS1NBWARSS:
Table of Contents

Advertisement

Available languages

Available languages

mnstaliation
mnstructions
REVERSING THE DOOR SWING
(Single Door Refrigerator
Models
only)
IMPORTANT
NOTES
When
reversing
the door swing:
NOTE: Door swing
is not reversible
on stainless
steel models.
• Read the instructions
all the way through
before
starting.
• Parts are included
in the door hinge kit.
• Handle
parts carefully
to avoid scratching
paint.
• Set screws
down
by their
related
parts to
avoid using them
in the wrong
places.
• Provide
a non-scratching
work surface
for
the doors.
IMPORTANT:
Once you begin, do not move the
cabinet
until door-swing
reversal
is completed.
These instructions
are for changing
the hinges
from the right side to the left sideiif
you ever
want to change
the hinges
back to the right side,
follow
these same instructions
and reverse all
references
to left and right.
• Once door swing
is finalized,
ensure
the logo badge is properly
aligned
and
permanently
secured to the door by removing
the adhesive
cover on the back side,
NOTE: A replacement
logo badge is included
in the hinge kit.
Unplug
the refrigerator
from its electrical
outlet.
Empty
all door shelves,
including
the dairy
compartment.
TOOLS YOU WiLL NEED
Adjustable
Wrench
5/16" Socket
Ratchet!Driver
Masking
Tape
Phillips Screwdriver
Thin-blade
Screwdriver
Torx T-20 Driver
[] REMOVE THE
REFRIGERATOR DOOR
[]
Tape the door
shut with
masking
tape.
[]
Remove
the hinge
cover
on top of the
refrigerator
door
by removing
the Phillips
head screws
and pulling
it up,
[]
Using a 5/16" socket
ratchet/driver,
remove
the bolts securing
the top hinge to
the cabinet.
Then
lift the hinge
straight
up
to free the hinge
pin from the socket
in
the top of the door.
[]
O
-linge
Cover
____nge
Remove
the tape
and tilt the door
away
from
the cabinet.
Lift the door
off the
center
hinge
pin. Ensure
that
the plastic
hinge
pin thimble
remains
on the hinge
pin
or inside
door
hinge
pin hole
located
in the
bottom
of the door.
[]
Set the door on a non-scratching
surface
with the inside
up.
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents