GE PDCS1NBWARSS Owner's Manual And Installation Instructions page 26

mnstaliation mnstructions
REPLACING THE FREEZER DRAWER
(on some models)
I
o Two people may be required to complete
this procedure.
[] ATTACH AND SECURE THE
DRAWER FRONT TO THE SLIDES
[] Pull out the rail assemblies to the full
length on each side of the cabinet.
[] Drive the top screw into the door on each
side until it is 1/2 way in.
[] Hang the drawer front onto open slots on
the slides.
• Slot
[] ATTACH AND SECURE THE
DRAWER FRONT TO THE SLIDES
(CONT.)
[] Drive screws fully. (There are 10 screws.)
Screw
Step D2: I J
Drive
fully•
Step D3:
Drive
screws
in these
holes.
Step D1:
Line up
screw
hole in
freezer
drawer
and
drive
fully,
[] REPLACE THE FREEZER BASKET
Replace the lower freezer basket by
lowering it into the frame.
J
\\
\,\
\\\\
,\
26