GE PDCS1NBWARSS Owner's Manual And Installation Instructions page 14

Replacing the light bulbs.
Turning the control to the 0 (off) position does not remove power to the light circuit.
Refrigerator Lights
_i, CAUTION: a ht b ./bsmay be h o_
0 Unplug the refrigerator.
To remove tile light shieM, grasp tile
shield at tile back and pull out to
release tile tabs at tile back.
Rotate tile shield down and then
torward to release tile tabs at tile fl'ont
oI tile shield.
@ _dtei" replacing with an appliance bulb
of the same or lower wattage, replace
the shield.
0 Plug tile refrigerator back in.
IVOTE:Appliai,_ce bulbs ma_ be ordered
fl'om (;E Parts and Accessories,
800.626.2002.
Appearance may vary
Freezer Light
A CAUTION: L/_htb./bs ma_ be h o_
Unplug tile refrigerator.
The bulb is located at tile top of tile
fl'eezer inside a light shield. To remove
the shield, grasp the shield at the back
and pull out to release tile tabs at tile
back.
_]b Rotate tile shield down and then
fin'ward to release tile tabs at tile fl'ont
of the shield.
_Mter replacing with an appliance bulb
of tile same or lower wattage, replace
the shield.
0 Plug tile refrigerator back in.
/4