Installation instructions.
Typical Installation
Illustration
Soft water
120-volt outlet
24Vtransformer
SAE
GOES HERE
_===_Hardwater
Hardwater to
outside faucets
Union(2)(not supplied)
Installationnut (2)
Copper t ube,3/4" (2)
Washer(2)
INLET
Bypass Valve
• Pulloutfor service
• Pushinfor bypass
NOTE" T hreadsontile bypass
valveare 1" malepipe.If 1"
pipesare needed, d o not use
thecoppertubesandnuts
included. B uy 1" pipethread
femaleadapter, a ndplumb
directlyto 1" threads.
NOTE." S eeDrain Hose
Connections section.
Fig. 1
CROSS-OVER
Useifwater supplyflows fromthe left.
includesingleor 3-valvebypass.
Hardwater
out, t
.
Optional 3-Valve Bypass Installation Illustration
Adapters forthis installationare notsupplied with thesoftener.
Toorder theseadapters, callGEParts 800-626-2000.
(Askforpart# WS60X10006)
Softwater
120-volt o utlet
Bypass valve
Outletvalve (_
Hardwaterto
outsidefaucets
inletvalve
• Opentheinlet andoutlet
valves
• Closetile bypass valve
Forbypasshardwater:
• Closethe inlet andoutlet
Nut (2/
valves
Copper t ube, • Openthebypassvalve
3/4" (2)
Washer(2)
Installation adapter(2)
INLET
NOTE.'Tl_reads
onthe installationadapters are 1"
malepipe.if 1" pipesare needed, d o not usetl_e
coppertubesandnutsincluded. B uy 1" pipethread
femaleadapterandplumbdirectlyto 1" threadson
installation adapters.
Fig. 2
Hardwater
Fromsoftener ,I_
outlet
Tosoftener
inlet
CROSS-OVER
Useifwatersupplyflowsfrom
theleft, lncludesingleor
3-valvebypass.