GE GXSF23Z01 Owner's Manual & Installation Instructions page 22

Before you call for service...
Troubleshooting -tips
Problem Possible Causes What To Do
Resin beads shewing Cracked distributor • Call for senice.
up in drinking water
and sink
Sounds you might hear Running water from the unit into • This is normal.
a drain
Water has air bubbles Air in system after installation • _,\tll go away after it rims tbr a while.
and is cloudy
Error Code on control Wiring may have worked loose in
control
• Unplug transii)rmer.
• Rem_)ve control o)ver, release clips on side.
• Check fin lo_)se/incorrect wiring commctions to elecnonic
board or switch. Recommct as required.
,, Reassemble connol c¢)ver.
• Plug in T_>msfi_rmer.
• Wait six minutes for Error
(ode to reappear.
• If Error (ode reappears call tot secdce.
22